CBNC (Cubic Boron Nitride)

596,00 SEK

Item Number: CBNC

Cubic boron nitride (CBN). Grit size 25 micron, e g “fine”.

Description

Cubic boron nitride is an extremely hard synthetic, crystalline material. CBN is superior in terms of abrasion resistance and oxidation resistance in contact with steel alloys. It is especially good to use for stainless steel knives and hardened stainless steel cutting tools. CBN is not harder than diamond but is thermally and chemically more stable than pure diamond. Another feature of the CBN sharpener is that it retains its shape no matter how much it is used. In addition, this coating is located on both sides of this profiled stone. Grit size 25 micron, e g “fine”.

Size: 85 x 54 x 3,6 mm
Weight: 130 grams

3997 in stock

Gift wrapping

Laser engraving

Engraving text

Choose text for your engraving. Click here for more info about laser engraving, fonts, placement etc. Please note that laser engraved products are not covered by the return policy.

Remember to choose the font for your engraving below.

Engraving font

Choose a font for your engraving

Engraving logo

Choose a logo for engraving. Click here for more info about laser engraving, formats, placement etc. Please note that laser engraved products are not covered by the return policy.

(max file size 512 MB)
Sharpening knife on DC4 whetstone

How to use your CBN sharpener

Use no oil or water. Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions. After restoring the edge to original shape, you can also use a ceramic stone to “de-burr” the edge in order to get a razor-sharp edge.

The ink trick

Colour the edge with a felt-tip pen. You can check your progress in sharpening the knife by observing where the colour is removed.

How to check the sharpness

To check the sharpness of your knife, pull the edge very lighly on your finger nail. If it cuts, the knife is certainly sharp enough for most tasks.